| Abnormal Occurrence |
Possible Reasons |
Solutions |
|
| Computer board no vision |
Not properly plugged
Now power on socket
Not switch on
Power off
|
Re-plug
Check socket or change one
Switch on
Wait power on
|
| nlet branch leak |
Inlet branch's tie-in not connected to tap
Inlet branch not screwed down with connector of washing machine |
Reinstall the tie-in of inlet branch
Screw down the connector |
| Not drain |
Drainpipe’s outlet too high or not down
Drainpipe twisted or blocked |
Low down the drainpipe
Smooth the drainpipe
|
| No water in |
Water supply stopped
Tap not on
Inlet sieve blocked |
Wait water supplyTurn on tapClean sieve as per the method of “cleaning for inlets” |
| Dehydration stopped and water in |
Clothing deflection |
This is the self-correcting of the program for dehydration unbalance. Excess or exiguity of clothing or unbalanced position of the machine will result in self-correcting. |
| No dehydration |
Not cover the lid on after drainage
Reopen the lid after dehydration started |
Cover properly
|
| Intermittent dehydration after started |
For better dehydration |
Usually it’s normal occurrence. |
| A few water out when first used |
The left water of functional test of the factory |
Usually it’s normal occurrence. |
|
| |
